How to winamp Shoutcasting setup
How To Connect
How to Broadcast to your ShoutHost Server using Winamp?
For the install On your pc it's very simple download latest version of winamp
Download Winamp install it first (For Windows)
and Download SHOUTcast DSP Plug-In For Winamp (For Windows)
Once you have installed the DSP, start Winamp, open the preferences(CTRL+P) and click on the DSP/Effects subcategory under the Plug-ins tree. Please refer to the picture below:
If you see "Nullsoft SHOUTcast Source DSP v2.3.2" in the right panel, then you have correctly installed the SHOUTcast Broadcast DSP Plug-in.
SHOUTcast Source DSP
Select the "Output" tab at the top of your DSP window. Select "Output 1" under the selection box, and fill in all of the following fields properly.
Here, you need to enter the server IP that was given to you in the welcome email you received. Make sure that you put in the proper server IP, or else you will not be able to connect.
In this field, you need to enter the port that was given to you in your welcome email. It should contain 4 numbers. Once again, this must be set properly or else you will be unable to connect.
Last, you need to enter the encoder (source) password that was given to you in your welcome email. Enter this here, and make sure there are no mistakes. (Common mistakes include using the copy and paste method. There is sometimes a space added during the process that will cause an invalid password error)
Yellowpage setup (streaming server display details)
Click on the "Directory" tab right above where you entered all of the previous information.
If you'd like your server to be listed in the SHOUTcast directory, check the "Make this server public" box, and fill in all of the information below the box in a proper manner.
Be sure to check the "Enable Title Updates" and the two boxes that say "Auto" in
order to show your users the title of the song that is playing.
Encoder Settings (select streaming audio format)
Select the "Encoder" tab at the top of your DSP window.
Make sure under the selection box, you have selected "Encoder 1".
The Encoder Type can be set to either MP3 or AAC+, our servers support both.
MP3 audio sounds alright, but is compatible with just about every media player on the market. AAC+ is only compatible with Winamp and Windows Media Player (with a plugin), but sounds much better at lower qualities. Be sure to choose wisely.
In the Encoder Settings drop down, select the bitrate that you ordered from us, and be sure that the line you selected has "Stereo" at the end, so individual sounds will come out of both of your listeners speakers.
Note: If you try streaming at a bitrate higher than what you have ordered you will not be able to stream and your server may shut itself off.
Input settings (select the input audio source)
Select the "Input" tab at the top of your DSP window. Unless you have specific soundcard input settings, or want to talk on your stream, select "Winamp" at the Input Device. As every soundcard is different and individual, we cannot give any tutorials for the Soundcard Input.
Go back to the "Output" tab in your DSP window. Make sure "Output 1" is selected, and then click the connect button. In the status box above the button, it should give a time and then "Sent xxxx bytes".
Congratulations, you have begun to stream audio!
You may now open any Winamp-compatible audio file in your player, and it will stream to our servers.
How to Broadcast Live using turntables?
To broadcast using Shouthost the live content from the turntable, you will need to install the software that would allow you to connect your turntable to the PC. Most new turntables have USB or FireWire audio output build-in so they can be easily connected to the PC. The PC should have the hardware drivers installed for the turntable and recognize it as a valid audio input device.
The turntables that do not have the USB or Fire wire audio output connections can be attached to the PC with the Long male to male 1/8" Stereo - 1/8" Stereo cable
Here are the cables that can be used to connect the turntable to the PC:
Obtain Dual Short 1/8" Stereo - 1/8" Stereo cable with two female endings (also known as Dual Headphone Jack splitter).
One plug will be used for headphones (we are assuming that the headphones have a classical 1/8" stereo-out male connector) and the other for the line-in on the PC audio card.
In some cases the 1/8" Stereo - 1/8" Stereo cable may not be needed if the turntable has several headphone jacks. If the headphone jacks are not 1/8" Stereo the 1/4" adapters may be needed. Also the turn table could have RCA out, in that case 1/8" Stereo Plug to RCA can be used to plug the turn table directly in to the soundcard Line-in.
In case the turntable has only the 1/4" stereo-out you will need the 1/8" to 1/4" stereo adapted. Plug the adapter in to the stereo-out of the turntable and then the Dual Short 1/8" Stereo - 1/8" Stereo cable in to it.
The last cable you will need will be the long male to male 1/8" Stereo - 1/8" Stereo cable.
Plug the earphones in to one end of the Dual Short 1/8" Stereo - 1/8" Stereo cable and then the long male to male 1/8" Stereo - 1/8" Stereo cable in to the other end. The long mail end of the 1/8" Stereo - 1/8" Stereo cable should go in the blue soundcard line-in jack. WARNING: before you connect the cable to the soundcard make sure the volume is at minimum.